Hand Crank Dynamo Flashlights DT-CR-017

Detailed Product Description
Max. brightness  50000 Mcd Switch lifetime 5000 Time
Lighting time after 1 minute cranking 30 Minute
  The whole unit lifetime 5 Year
Mobilephones  talking time after 3 minutes cranking 2-8 Minute Power output >2 W
Using Method :
Lighting:
1.      Unlock the handle and crank it at the speed of 3 circles per second for about 1 minute, Press down the button to turn on the light.
2.      Push the switch forward to turn on 3 LEDs, push backward to turn off.
Charge mobile phone:
1.      Plug one end of the charging cable into the mobile phone and the other end into this product.
2.      Crank the handle at the speed of 2-3 circles per second to charge the mobile phone.
Compass:
Hold the product horizontally, the arrowhead marked N inside the compass is the direction to north.
Cautions:
1.      Fully insert the plug into the socket, otherwise it possibly leads to circuit shut off.
2.      Crank it as even as possible (keep rotating steady). Too slowly cranking would make current weak and prolong the charging time, and too violent cranking possibly damages the power driving system.
3.      Pay attention to the holding gesture when cranking so as not to hurt your fingers.
4.      Do not place this product in where temperature or humidity is high.
5.      This product may not fully charge the battery of a mobile phone.
6.      Strictly use the cable that our company specifies to charge the specified mobile phones, otherwise it possibly damages the mobile phone or a mobile phones battery.
7.      Crank it one time for no less than 1 minute per month to prolong the using life of the battery.
8.      In order to protect the batterys using life and the products mechanical life, do not crank it for power continuously for more than 10 minutes.
9.      Keep it away from iron object or magnetic place when using the compass function.
Size and Weight:
Size:   141*62*39 mm
Weight: 133 g